Geisinger Medical Laboratories Test Catalog

Order Display Name: Geisinger Epic Procedure Code Or ID CPT Code:  

FACTOR X (10) CLOTTING ACTIVITY

Geisinger Epic Procedure Code: LAB2258             Geisinger Epic ID: 7130
       

SPECIMEN COLLECTION
Specimen type:
 Platelet-poor plasma
Preferred collection container:
Alternate Collection Container:
Other size blue-top (3.2% sodium citrate) tubes (e.g., 1.8 mL, 4.5 mL)
Specimen required:
1 mL plasma aliquot for a single factor study. Each additional factor study requires an additional 0.5 mL aliquot. Samples requiring heparin neutralization require an additional 0.5 mL for each factor.
Special notes:
  • If the patient’s hematocrit (HCT) is >55%, the volume of anticoagulant in the tube must be adjusted. Contact a performing location for sodium citrate adjusted tubes or instruction for how to adjust the sodium citrate.
  • When possible, use fresh venipuncture.
  • Avoid prolong tourniquet time (< 1 minute) and hemolysis during collection as this will alter results.
  • If indwelling catheter or butterfly collection device must be used, draw sample from a non-heparinized lumen or flush the line with 5 mL of saline and discard/use first 5-10 mL of blood for other purposes.
  • Tubes should be >90% filled.
  • Immediately mix gently after collection by inverting the tube end over end 5 to 6 times. Avoid vigorous mixing or additional inversion. Observe for the presence of clots or hemolysis and recollect if observed.
SPECIMEN PROCESSING
Specimen processing instructions:
Centrifuge specimen immediately at designated time and speed to obtain platelet-poor plasma (<10,000/µL). Using a plastic pipette, carefully remove plasma from cells, avoiding platelet/buffy layer by leaving a thin layer of plasma on top the cells. The centrifuged plasma should be aliquoted (1 mL per aliquot) into clearly labeled polypropylene tubes. The number of tests ordered will determine the aliquots needed. Check the residual specimen for clot and if present discard sample and redraw specimen. If plasma is icteric, lipemic or hemolyzed a lab comment should be generated to notify staff. Freeze upright in non-thaw freezer. 
Transport temperature:
 Frozen on dry ice
Specimen stability:
 Room temperature (whole blood): 4 hours
Room temperature (plasma off cells): 8 hours
Frozen (plasma) -20°C: 2 weeks
Frozen (plasma) -70°C: 6 months
Rejection criteria:
 Clotted, hemolyzed, improperly filled tubes, improper anticoagulant ratio (HCT >55% and citrate not adjusted), refrigerated specimens, or stability exceeded.

Note: Specimen suspected of thawing in transport, indicated by slant in aliquot or specimen in lid of tube, will have testing performed, and the comment “interpret results with caution as thawing suspected” added to results.
TEST DETAILS
Reference interval:
 70-120%
Additional information:
 Anticoagulation Impact on Coagulation Tests
CPT code(s):
 85260
Note: The billing party has sole responsibility for CPT coding.  Any questions regarding coding should be directed to the payer being billed.  The CPT codes provided by GML are based on AMA guidelines and are for informational purposes only.
Test includes:
 Factor X activity.
Methodology:
Mechanical clot-based
Synonyms:
Factor X, Factor 10, FA10, Stuart Prower Factor
Clinical significance:
Clinical significance: Factor X is a glycoprotein that plays a central role in coagulation. It is part of the common clotting cascade and in the presence of cofactor Va, converts prothrombin (Factor II) to thrombin. Factor X activity assay can be useful in evaluating the reason for both a prolonged PT and aPTT and normal thrombin time. Very low levels may result in bleeding and are seen in hereditary and acquired cases, as well as warfarin use. This test can be confused with an anti-Xa test (unfractionated heparin or low molecular weight heparin level) and all requests for Factor X will be forwarded to pathology to investigate correct test order.
Doctoral Director(s:)
Michelle Grant DO    
Review Date: 03/31/2023

Performing Locations

Geisinger Medical Center

Performing laboratory: Coagulation
Technical Lead: Margaret Knowles-Tuchman
Frequency: Daily, 8 a.m. - 5 p.m.
Performed STAT? No
Locations  |    Search  |    Site Map |   Contact Us
©2000-2024 Geisinger Health System.   All rights reserved.